Caterpillar TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C Operation And Maintenance Manual 31200752
Caterpillar TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C Operation And Maintenance Manual 31200752 - Image 2
Caterpillar TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C Operation And Maintenance Manual 31200752 - Image 3
Caterpillar TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C Operation And Maintenance Manual 31200752 - Image 4
Caterpillar TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C Operation And Maintenance Manual 31200752 - Image 5

Caterpillar TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C Operation And Maintenance Manual 31200752

$30.00

  • Type Of Manual: Operation And Maintenance Manual
  • Manual ID: 31200752
  • Number of Pages: 226
  • Size: 22.7MB
  • Format: PDF
Category:

Product details

  • Model List:

    • TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
  • 1. _E_TH336 337 406 407 414 514 417C_CAT_OMM
  • 1.1. Revision Log
  • 1.2. Read This First
  • 1.3. Table of Contents
  • 1.4. Section 1 General Safety Practices
  • 1.4.1. Hazard Classification System
  • 1.4.1.1. Safety Alert System and Safety Signal Words
  • 1.4.2. General Precautions
  • 1.4.3. Operation Safety
  • 1.4.3.1. Electrical Hazards
  • 1.4.3.2. Tip Over Hazard
  • 1.4.3.3. Travel Hazard
  • 1.4.3.4. Load Falling Hazard
  • 1.4.3.5. Lifting Personnel
  • 1.4.3.6. Driving Hazards on Slopes
  • 1.4.3.7. Pinch Points and Crush Hazards
  • 1.4.3.8. Fall Hazard
  • 1.4.3.9. Chemical Hazards
  • 1.4.4. Product Link (if equipped)
  • 1.4.4.1. Federal Communications Commission (FCC) Information for Users
  • 1.5. Section 2 – Pre-Operation and Inspection
  • 1.5.1. Pre-Operation Check and Inspection
  • 1.5.2. Safety Decals
  • 1.5.2.1. TH336C, TH337C, TH406C TH407C (CE AUS)
  • 1.5.2.2. TH406C TH407C (ANSI)
  • 1.5.2.3. TH414C, TH514C TH417C (CE AUS)
  • 1.5.2.4. TH514C (ANSI)
  • 1.5.3. Walk-Around Inspection
  • 1.5.4. Warm-Up and Operational Checks
  • 1.5.4.1. Warm-Up Check
  • 1.5.4.2. Operational Check
  • 1.5.5. Operator Cab
  • 1.5.6. Windows
  • 1.5.6.1. Cab Door Window
  • 1.5.6.2. Rear Window
  • 1.6. Section 3 – Controls and Indicators
  • 1.6.1. General
  • 1.6.2. Controls
  • 1.6.2.1. Instrument Panel
  • 1.6.2.2. Display Screen
  • 1.6.2.3. Ignition
  • 1.6.2.4. Park Brake
  • 1.6.2.5. Parking Procedure
  • 1.6.2.6. Transmission Control Lever (if equipped)
  • 1.6.2.7. Load Stability Indicator – LSI (CE AUS)
  • 1.6.2.8. Steering Column Adjuster
  • 1.6.2.9. Joystick
  • 1.6.2.10. Front Console Switches
  • 1.6.2.11. Right Console Switches
  • 1.6.2.12. Accessory Control Lever
  • 1.6.2.13. Reversing Fan (if equipped)
  • 1.6.3. Anti Theft
  • 1.6.4. Steer Modes
  • 1.6.4.1. Manual Steering Alignment Mode Change
  • 1.6.4.2. All Wheel Assisted Steering Alignment Mode Change
  • 1.6.5. Operator Seat
  • 1.6.5.1. Operator Presence (CE AUS)
  • 1.6.5.2. Adjustments
  • 1.6.5.3. Seat Belt
  • 1.6.6. Boom Indicators
  • 1.6.6.1. Boom Extension
  • 1.6.6.2. Boom Angle (AUS)
  • 1.7. Section 4 – Operation
  • 1.7.1. Engine
  • 1.7.1.1. Starting the Engine
  • 1.7.1.2. Battery Boosted Starting
  • 1.7.1.3. Normal Engine Operation
  • 1.7.1.4. Shut-Down Procedure
  • 1.7.2. After-Treatment System (S/N MJR00150 After, S/N DJB00150 After, S/N GAT00150 After, S/N MLH00150 After, S/N KEK00150 After, S/N MWC00150 After, S/N RRJ00150 After – if equipped with 75 kW engine)
  • 1.7.2.1. Automatic Regeneration
  • 1.7.2.2. Manual Regeneration
  • 1.7.3. Operating with a Non-Suspended Load
  • 1.7.3.1. Lift Load Safely
  • 1.7.3.2. Picking Up a Load
  • 1.7.3.3. Transporting a Load
  • 1.7.3.4. Leveling Procedure
  • 1.7.3.5. Placing a Load
  • 1.7.3.6. Disengaging a Load
  • 1.7.4. Operating with a Suspended Load
  • 1.7.4.1. Lift Load Safely
  • 1.7.4.2. Picking Up a Suspended Load
  • 1.7.4.3. Transporting a Suspended Load
  • 1.7.4.4. Leveling Procedure
  • 1.7.4.5. Placing a Suspended Load
  • 1.7.4.6. Disengaging a Suspended Load
  • 1.7.5. Road Operation (CE)
  • 1.7.6. Loading and Securing for Transport
  • 1.7.6.1. Tiedown
  • 1.7.6.2. Lifting
  • 1.8. Section 5 – Attachments and Hitches
  • 1.8.1. Approved Attachments
  • 1.8.2. Unapproved Attachments
  • 1.8.3. JLG Supplied Attachments
  • 1.8.3.1. TH336C, TH337C, TH406C TH407C
  • 1.8.3.2. TH414C TH417C
  • 1.8.4. Telehandler/Attachment/Fork Capacity
  • 1.8.5. Use of the Load Chart
  • 1.8.5.1. Capacity Indicator Locations
  • 1.8.5.2. Sample Load Chart (CE ANSI)
  • 1.8.5.3. Sample Load Chart (AUS)
  • 1.8.5.4. Example
  • 1.8.6. Attachment Installation
  • 1.8.6.1. CAT Quick Coupler
  • 1.8.6.2. JD Coupler
  • 1.8.6.3. Manitou Coupler
  • 1.8.6.4. JCB Coupler
  • 1.8.6.5. Hydraulic Operated Attachment
  • 1.8.7. Platform Attachment (if equipped)
  • 1.8.8. Adjusting/Moving Forks
  • 1.8.9. Attachment Operation
  • 1.8.9.1. Carriage w/Forks
  • 1.8.9.2. Side Shift Carriage
  • 1.8.9.3. Rotate/Side Tilt Carriage and Fork Rotator Carriage
  • 1.8.9.4. Fork Positioning Carriage
  • 1.8.9.5. Multi-Purpose Bucket
  • 1.8.9.6. Grapple Bucket
  • 1.8.9.7. Manure Fork
  • 1.8.9.8. Bale Handler
  • 1.8.9.9. Coupler Mounted Hook
  • 1.8.9.10. Truss Boom
  • 1.8.9.11. Personnel Work Platform – Fork Mounted
  • 1.8.9.12. Platform
  • 1.8.10. Hitches and Trailer Brakes (TH336C, TH337C, TH406C TH407C)
  • 1.8.10.1. Retrieval Hitch
  • 1.8.10.2. Pin Hitch – CUNA C (Italy)
  • 1.8.10.3. Pin Hitch – CUNA D2 (Italy)
  • 1.8.10.4. EEC Manual Pin Hitch
  • 1.8.10.5. EEC Auto Hitch
  • 1.8.10.6. Piton Frame and EEC Auto Hitch
  • 1.8.10.7. Hydraulic Hitch
  • 1.8.10.8. Trailer Brakes
  • 1.9. Section 6 – Emergency Procedures
  • 1.9.1. Towing a Disabled Product
  • 1.9.1.1. Moving Short Distances
  • 1.9.1.2. Moving Longer Distance
  • 1.9.2. Emergency Lowering of Boom
  • 1.9.3. Emergency Lowering of Boom If Equipped for Platform
  • 1.9.3.1. Auxiliary Power System
  • 1.9.3.2. Machine Safety System Override (MSSO)(CE, if equipped)
  • 1.9.4. Cab Emergency Exit
  • 1.10. Section 7 – Lubrication and Maintenance
  • 1.10.1. Introduction
  • 1.10.1.1. Clothing and Safety Gear
  • 1.10.2. General Maintenance Instructions
  • 1.10.3. Service and Maintenance Schedules
  • 1.10.3.1. 1st 50 Hour Maintenance Schedule
  • 1.10.3.2. 1st 250 Hour Maintenance Schedule
  • 1.10.3.3. 500 Hour Maintenance Schedule
  • 1.10.3.4. , 1500 3000 Hour Maintenance Schedule
  • 1.10.3.5. 12000 Hour Maintenance Schedule
  • 1.10.4. Lubrication Schedules
  • 1.10.4.1. Hour Lubrication Schedule
  • 1.10.4.2. Hour Lubrication Schedule
  • 1.10.5. Operator Maintenance Instructions
  • 1.10.5.1. Fuel System
  • 1.10.5.2. Cab Air Filters (if equipped)
  • 1.10.5.3. Engine Oil
  • 1.10.5.4. Engine Cooling System
  • 1.10.5.5. Hydraulic Oil
  • 1.10.5.6. Transmission Oil
  • 1.10.5.7. Air Intake System
  • 1.10.5.8. Battery
  • 1.10.5.9. Windshield Washer System (if equipped)
  • 1.11. Section 8 – Additional Checks
  • 1.11.1. General
  • 1.11.2. Load Stability Indicator System (CE AUS)
  • 1.11.3. Boom Interlock (TH414C, TH514C TH417C)
  • 1.11.4. Auxiliary Power (If Equipped for Platform)
  • 1.12. Section 9 – Specifications
  • 1.12.1. Product Specifications
  • 1.12.1.1. Fluid Capacities
  • 1.12.1.2. Performance
  • 1.12.1.3. Dimensions
  • 1.12.1.4. Declaration of Vibration (CE)
  • 1.12.1.5. Noise Emission Level (CE)
  • 1.12.1.6. Machine Towing Capacity
Rate this product

Related products