Bucyrus Austar AFC Technical Manual BI616740
Bucyrus Austar AFC Technical Manual BI616740 - Image 2
Bucyrus Austar AFC Technical Manual BI616740 - Image 3
Bucyrus Austar AFC Technical Manual BI616740 - Image 4
Bucyrus Austar AFC Technical Manual BI616740 - Image 5

Bucyrus Austar AFC Technical Manual BI616740

$30.00

  • Type Of Manual: Technical Manual
  • Manual ID: BI616740
  • Number of Pages: 72
  • Size: 2.7MB
  • Format: PDF
Category:

Product details

  • Model List:

    • Austar AFC
  • 1. M00633.pdf
  • 1.1. General Safety
  • 1.1.1. Personnel
  • 1.1.1.1. Operation
  • 1.1.1.2. Installation and repair
  • 1.1.2. Operating conditions
  • 1.1.2.1. Intended use
  • 1.1.2.2. Unauthorised use
  • 1.1.3. Safety instructions
  • 1.1.3.1. General rules
  • 1.1.3.2. Noise emissions
  • 1.1.3.3. Condition
  • 1.1.3.4. Safety equipment
  • 1.1.3.5. Information signs
  • 1.1.3.6. EMERGENCY-STOP
  • 1.1.3.7. Block working area
  • 1.1.3.8. Moving parts
  • 1.1.4. Storage and Transport
  • 1.1.4.1. Transport safety device
  • 1.1.4.2. Lifting Equipment
  • 1.1.4.3. Floor conveying device
  • 1.1.5. Erection and commissioning
  • 1.1.5.1. Inclined storage
  • 1.1.5.2. Environmental acceptability
  • 1.1.6. Operation
  • 1.1.6.1. Moving conveyor
  • 1.1.7. Maintenance and repair
  • 1.1.7.1. Original parts
  • 1.1.7.2. Release of walking legs
  • 1.1.7.3. Lifting the conveyor
  • 1.1.7.4. Safety equipment
  • 1.1.8. Hydraulics
  • 1.1.8.1. Handling of Hydraulic Fluids
  • 1.1.8.2. Maintenance and Repair
  • 1.1.8.3. Permissible Hoses
  • 1.1.8.4. Installation of Hydraulic Hoses
  • 1.2. Storage and Transport
  • 1.2.1. Storage
  • 1.2.1.1. Corrosion protection
  • 1.2.2. Storage of the Equipment
  • 1.2.2.1. No direct exposure to sunlight
  • 1.2.2.2. Dirt and moisture
  • 1.2.2.3. Short-term storage
  • 1.2.2.4. Long-term storage
  • 1.2.2.5. Plastic deformation
  • 1.2.2.6. Random sample inspection
  • 1.2.2.7. Natural ageing
  • 1.2.2.8. HFA fluids
  • 1.2.3. Transport
  • 1.2.3.1. Load units dimensions and weights
  • 1.2.4. Before transport
  • 1.2.4.1. Temperatures below freezing
  • 1.2.4.2. Electrical and electronic components
  • 1.2.5. Transport of the components
  • 1.2.5.1. Machine parts
  • 1.3. Introduction
  • 1.3.1. Functions and Purpose of AFC
  • 1.3.2. General Data and Information
  • 1.3.3. Major components of AFC
  • 1.3.3.1. Pan Line
  • 1.3.3.2. Spill Plates
  • 1.3.3.3. AFC Chain
  • 1.3.3.4. Dogbone
  • 1.3.3.5. Jumbotrack Shearer Haulage
  • 1.3.3.6. AFC Greasing
  • 1.4. Carry-Out Start, Stop and Shut-down Procedures
  • 1.4.1. Normal Start Procedure
  • 1.4.2. Temporary Stop
  • 1.4.3. Normal Shut Down
  • 1.5. Chain Tensioning System Components Operation
  • 1.5.1. Overview
  • 1.5.2. Chain Tensioning System Components
  • 1.5.2.1. TG Drive Frame
  • 1.5.2.2. Reed Rod
  • 1.5.2.3. Pressure Sensor
  • 1.5.2.4. Solenoid Driver
  • 1.5.2.5. PMC-R Unit
  • 1.5.2.6. Manual Controls
  • 1.5.3. Operation of the PMC-R in the CTS
  • 1.5.4. CTS Operation Starting Automatic Operation
  • 1.5.5. CTS Operation Stopping Automatic and Manual Operations
  • 1.6. The CST (Controlled Start Transmission) System
  • 1.6.1. The Start Sequence of the CST system (Auto Mode)
  • 1.6.2. Major components of CST (Controlled Start Transmission) Syst
  • 1.7. PMC-D System
  • 1.7.1. Keyboard Functions
  • 1.7.1.1. Language Switchover
  • 1.7.1.2. Start Menu
  • 1.7.2. CST Operating Modes
  • 1.7.2.1. Selecting Operating Mode
  • 1.7.2.2. Automatic Mode
  • 1.7.2.3. Semi-automatic Mode
  • 1.7.2.4. Inspection Mode
  • 1.7.2.5. Emergency Mode
  • 1.7.2.6. Emergency Manual Mode
  • 1.7.3. Resetting the PMC-D System
  • 1.7.3.1. Resetting a RED alarm
  • 1.7.3.2. Resetting a YELLOW alarm
  • 1.7.4. PMC-D Operating Errors/Warnings
  • 1.7.4.1. Blockage Conveyor
  • 1.7.4.2. Chain Tensioner
  • 1.7.4.3. Cooling Oil Temperature
  • 1.7.4.4. Hydraulic Filter
  • 1.7.4.5. System Pressure
  • 1.7.4.6. Cooling Oil Pressure
  • 1.7.4.7. Input Speed
  • 1.7.4.8. Output Speed
  • 1.7.4.9. Overload
  • 1.7.4.10. PMC-D Communication Errors
  • 1.7.4.11. Current Measurement
  • 1.7.5. Changing AFC running modes
  • 1.7.5.1. Inspection Mode
  • 1.7.5.2. Changing to Emergency Mode
  • 1.7.5.3. Changing to Emergency Manual Mode (Slow Runner Mode)
  • 1.7.5.4. AFC Reverse Procedure
  • 1.8. Inspection Doors
  • 1.8.1. Inspection Door Removal Procedure
  • 1.9. Gearbox Maintenance
  • 1.9.1. Overview
  • 1.9.2. P-45, Maingate Oil Levels and Quantities
  • 1.9.3. KP-45,Maingate and Tailgate Oil Levels and Quantities
  • 1.9.4. Gearbox Breather Replacement Procedure
Rate this product

Related products