Bucyrus Newpac DBT Shield Technical Manual BI618932
Bucyrus Newpac DBT Shield Technical Manual BI618932 - Image 2
Bucyrus Newpac DBT Shield Technical Manual BI618932 - Image 3
Bucyrus Newpac DBT Shield Technical Manual BI618932 - Image 4
Bucyrus Newpac DBT Shield Technical Manual BI618932 - Image 5

Bucyrus Newpac DBT Shield Technical Manual BI618932

$30.00

  • Type Of Manual: Technical Manual
  • Manual ID: BI618932
  • Number of Pages: 98
  • Size: 2.7MB
  • Format: PDF
Category:

Product details

  • Model List:

    • Newpac DBT Shield
  • 1. M00656.pdf
  • 1.1. General Safety
  • 1.1.1. Residual Risk
  • 1.1.1.1. Supplementary Regulations
  • 1.1.2. Personnel
  • 1.1.3. Operation and maintenance
  • 1.1.3.1. Qualification
  • 1.1.4. Use in conformance with specifications
  • 1.1.5. Use contrary to specifications
  • 1.1.6. Safety instructions
  • 1.1.6.1. Basic principles
  • 1.1.6.2. Prerequisite
  • 1.1.6.3. Lighting
  • 1.1.6.4. Signalling Systems and Protective Devices
  • 1.1.6.5. Emergency Stop
  • 1.1.6.6. Support Lock-out Switch
  • 1.1.6.7. Moving Parts
  • 1.1.6.8. Automatic Mode
  • 1.1.7. Storage and transport
  • 1.1.8. Installation
  • 1.1.9. Operation
  • 1.1.10. Maintenance
  • 1.1.10.1. Hydraulics
  • 1.1.10.2. Handling of Hydraulic Fluids
  • 1.1.10.3. Maintenance and Repair
  • 1.1.10.4. Permissible Hoses
  • 1.1.10.5. Installation of Hydraulic Hoses
  • 1.2. Storage and transport
  • 1.2.1. Storage
  • 1.2.1.1. Storage of new equipment
  • 1.2.1.2. Exposure to Sunlight
  • 1.2.1.3. Natural Ageing
  • 1.2.1.4. Moisture and Dirt
  • 1.2.1.5. Short Term Storage
  • 1.2.1.6. Long Term Storage
  • 1.2.1.7. Plastic Deformation
  • 1.2.1.8. Random Sample Inspection
  • 1.2.1.9. HFA Fluids
  • 1.2.2. Used equipment
  • 1.2.2.1. Corrosion Protection
  • 1.2.3. Transport
  • 1.2.3.1. Transport Units
  • 1.2.3.2. Points of Attachment
  • 1.2.3.3. Temperatures Below Freezing
  • 1.2.3.4. Electrical and Electronic Components
  • 1.2.3.5. Transport Safety Devices and Transport Units
  • 1.3. Introduction
  • 1.3.1. General Data Information
  • 1.4. One Web Back System (OWB)
  • 1.5. Face and Gate End Shields
  • 1.6. Safe Working Areas
  • 1.6.1. Front Walkway
  • 1.7. Corrosion Protection
  • 1.7.1. Emulsion / Water / Oil Monitoring
  • 1.7.2. Quality of Processed Water
  • 1.7.3. Emulsion values
  • 1.8. Hydraulic Bleed Points
  • 1.8.1. Operation Screw Type
  • 1.8.2. Operation Manometer Gauge Port Type
  • 1.9. Control Unit Troubleshooting
  • 1.9.1. No response when selecting a function
  • 1.9.1.1. Corrective Action
  • 1.9.2. Bypassing or Sticking High or Low Flow Valves
  • 1.9.3. Replacing High/Low Flow Valve
  • 1.9.4. Double Solenoid Pilot Valve Replacement
  • 1.9.5. Control Block Filter and Pilot Non-Return Valve Replacement
  • 1.10. Cylinder Replacement
  • 1.10.1. Advancing Cylinder Replacement
  • 1.10.2. Leg Cylinder Replacement
  • 1.10.3. Base Cylinder Replacement
  • 1.10.4. Stabilising Cylinder Replacement
  • 1.10.5. Side Shield Cylinder Replacement
  • 1.10.6. Anti-Topple Cylinder
  • 1.10.7. Inter-Shield Hose Replacement
  • 1.11. Shields Maintenance (Electrical System)
  • 1.11.1. SCU Port Assignments
  • 1.11.1.1. PMC-R Port Assignments
  • 1.11.2. SKK Cables and Power Supply Testing
  • 1.11.3. Pressure Sensor Information
  • 1.11.4. Reed Rod Information
  • 1.11.5. Faulty Sensor Indication
  • 1.11.6. PMC-R Power Adaptor
  • 1.11.7. PMC-R Isolation Coupler
  • 1.12. Shields Maintenance (Electrical) Fault Finding
  • 1.12.1. Power Group without Power
  • 1.12.2. Support Is Not Operating
  • 1.12.2.1. Possible Reason
  • 1.12.2.2. Corrective Action
  • 1.12.2.3. If no LED on the Solenoid valve operated
  • 1.12.2.4. Change the solenoid driver.
  • 1.12.3. Single SCU without Power
  • 1.12.4. No Server SCU in the Network
  • 1.12.4.1. Possible Reason
  • 1.12.4.2. Corrective Action
  • 1.12.5. Single PMC-R Reboots on Power Up
  • 1.12.6. No Hydraulic Flow Pressure
  • 1.12.7. SRB Auto Sequence Stops
  • 1.12.8. Network Drops Out During Operation
  • 1.12.9. Incomplete Network
  • 1.12.9.1. Broken cable or faulty SCU
  • 1.12.10. When Operating a Support Function, the Power Drops Off and R
  • 1.12.11. During Auto sequence Support Does not Move
  • 1.12.12. Bankpush Not Completed
  • 1.12.13. PMC-R Error messages
Rate this product

Related products