BT Minimover LW13 Operator Manual 208591-040
BT Minimover LW13 Operator Manual 208591-040 - Image 2
BT Minimover LW13 Operator Manual 208591-040 - Image 3
BT Minimover LW13 Operator Manual 208591-040 - Image 4
BT Minimover LW13 Operator Manual 208591-040 - Image 5

BT Minimover LW13 Operator Manual 208591-040

$30.00

  • Type Of Manual: Operator Manual
  • Manual ID: 208591-040
  • : Operator Manual PDF
  • Number of Pages: 52
  • Size: 4.7MB
  • Format: PDF
Category:

Product details

  • Model List:

    • Minimover LW13
  • 1. BT Minimover LW13
  • 1.1. Valid from serial number 555494AA-
  • 1.2. Order number 208591-040
  • 1.2.1. Issued 2002-06-19 ITS
  • 1.2.1.1. It is important that you read this Operators Manual for your own safety
  • 2. Safety regulations
  • 2.1. Warning symbols
  • 2.1.1. Warning levels
  • 2.1.1.1. DANGER
  • 2.1.1.2. WARNING
  • 2.1.1.3. CAUTION
  • 2.1.2. Prohibitory symbols
  • 2.1.2.1. NO SMOKING
  • 2.1.2.2. NAKED FLAMES PROHIBITED
  • 2.1.2.3. GENERAL PROHIBITION
  • 2.1.3. Ordinance symbols
  • 2.1.3.1. SAFETY SHOES
  • 2.1.3.2. PROTECTIVE GLASSES
  • 2.2. General safety regulations
  • 2.2.1. Operating the truck
  • 2.2.2. Operators responsibility
  • 2.2.3. Working area
  • 2.2.4. Driving and conduct while driving
  • 2.2.5. Handling loads
  • 2.2.6. Parking the truck
  • 2.2.7. Handling the battery
  • 2.2.8. Maintenance and repair
  • 3. Warning and information plates and symbols
  • 3.1. Hydraulic control Lift
  • 3.2. Hydraulic control Lower
  • 3.3. Travel direction
  • 3.4. Signal/Horn
  • 3.5. Passengers prohibited
  • 3.6. Hydraulic oil filling
  • 3.7. Serial number
  • 3.8. Lifting points
  • 3.9. Identification plate
  • 4. Presentation of the truck
  • 4.1. Intended application of the truck
  • 4.2. Forbidden application of the truck
  • 4.3. Truck data
  • 4.3.1. Truck type
  • 4.4. Truck dimensions
  • 4.5. Identification plate
  • 5. Main components
  • 5.1. Tiller arm The truck is manoeuvred by the driver while walking. 204 degree steering area. The…
  • 5.2. Covers Easily removable, providing good accessibility for battery replacement.
  • 5.3. Start block and charging plug The battery is charged via the in-built charger.
  • 5.4. Electric panel Removable, which provides good access when servicing. 24 volt electrical suppl…
  • 5.5. Hydraulic unit Pump motor and pump are integrated in a compact unit.
  • 5.6. Drive unit with brake Fixed drive unit with electromagnetic brake, travel motor, gear and dri…
  • 5.7. Serial number The serial number plate fitted to the chassis.
  • 5.8. Support castor wheels Two support castor wheels to ensure stability
  • 5.9. Battery 24 V using two 12 V batteries.
  • 5.10. Fork carriage The forks are held horizontally by a link system. The fork carriage can be lu…
  • 5.11. Identification plate With model designation, serial number, year of manufacture, weight with…
  • 6. Controls and instruments
  • 6.1. Switch for safety reversing
  • 6.2. Travel direction selector and speed control
  • 6.3. Control for lifting and lowering the forks
  • 6.4. Horn
  • 6.5. LED to indicate start/battery status
  • 6.6. Start block and charging plug
  • 6.7. Key switch
  • 6.8. Emergency switch off
  • 6.9. Tiller arm and brake
  • 6.10. Switch for safety reversing (1)
  • 6.11. Travel direction selector and speed control (2)
  • 6.12. Control for lifting and lowering the forks (3)
  • 6.13. Horn (4)
  • 6.14. LED to indicate start/battery status (5)
  • 6.15. Start block and charging plug (6)
  • 6.16. Key switch (7)
  • 6.17. Emergency switch off (8)
  • 6.18. Tiller arm and brake (9)
  • 7. Accessories
  • 7.1. Load support
  • 8. Driving
  • 8.1. Starting the truck
  • 8.1.1. WARNING
  • 8.1.2. WARNING
  • 8.2. Braking
  • 8.3. Deceleration
  • 8.4. Steering
  • 8.4.1. WARNING
  • 8.5. Parking the truck
  • 8.5.1. WARNING
  • 9. Transporting loads
  • 9.1. WARNING
  • 9.2. WARNING
  • 9.3. WARNING
  • 9.4. WARNING
  • 9.5. WARNING
  • 9.6. WARNING
  • 9.7. WARNING
  • 9.8. Loading and unloading
  • 9.8.1. WARNING
  • 9.9. Collecting a load
  • 9.9.1. CAUTION
  • 9.10. Depositing a load
  • 9.10.1. CAUTION
  • 10. Battery
  • 10.1. Changing the battery
  • 10.1.1. WARNING
  • 10.1.2. When changing the battery proceed as follows
  • 10.1.2.1. WARNING
  • 10.2. Charging the battery
  • 10.2.1. GENERAL PROHIBITION
  • 10.2.2. Charging instructions
  • 10.2.2.1. Remove the charging plug (A) from the trucks start block.
  • 10.2.2.2. Pull out the spiral cable and connect the plug to a 230V wall socket. The charging process sta…
  • 10.2.2.3. When the main charge is in progress, only a yellow LED (B) is lit on the charger. The LED on t…
  • 10.2.2.4. When the main charge is complete, a yellow and green LED is lit on the charger. This indicates…
  • 10.2.2.5. When the truck is to be used, return the spiral cable and reconnect the charging plug in the t…
  • 10.2.2.6. Battery (Ah)
  • 10.2.2.7. Charger (A)
  • 10.2.2.7.1. WARNING
  • 11. Daily service and function checks
  • 11.1. WARNING
  • 11.2. Check points
  • 12. Maintenance
  • 12.1. Safety regulations with maintenance work
  • 12.1.1. WARNING
  • 12.1.2. WARNING
  • 12.1.3. WARNING
  • 12.1.4. WARNING
  • 12.1.5. CAUTION
  • 12.1.6. WARNING
  • 12.2. Maintenance work that is to be carried out by the operator
  • 12.3. Maintenance work that may be carried out by trained maintenance personnel
  • 12.4. Cleaning and washing
  • 12.4.1. External cleaning
  • 12.4.2. Cleaning the motor compartment
  • 12.4.3. Electrical components
  • 12.5. Maintenance chart
  • 12.5.1. Pos. no.
  • 12.5.2. Work to carry out
  • 12.5.2.1. Interval in days/weeks/months – may vary due to application
  • 12.6. Lubrication chart
  • 12.6.1. Service point
  • 12.6.2. Interval/Running hours
  • 12.6.3. Lubricant
  • 12.7. Oil and grease specification
  • 12.7.1. Lubricant
  • 12.7.2. Specification
  • 12.7.3. Application area
  • 13. Transporting and storing the truck
  • 13.1. The trucks dimensions and weight as standard
  • 13.1.1. The trucks dimensions and weight
  • 13.2. Lifting the truck
  • 13.2.1. WARNING
  • 13.2.2. WARNING
  • 13.3. Towing and transporting a defective truck
  • 13.3.1. WARNING
  • 13.4. Storing the truck
  • 13.4.1. Battery
  • 13.4.2. Hydraulic system
  • 13.4.3. Drive unit
  • 13.5. Starting after a period of disuse
  • 14. Recycling/discarding
  • 14.1. Discarding the battery
  • 14.2. Scrapping the truck
  • 14.2.1. Chassis
  • 14.2.2. Hydraulic system
  • 14.2.3. Electrical system
Rate this product

Related products