Bucyrus 25M3 Technical Manual BI619307
Bucyrus 25M3 Technical Manual BI619307 - Image 2
Bucyrus 25M3 Technical Manual BI619307 - Image 3
Bucyrus 25M3 Technical Manual BI619307 - Image 4
Bucyrus 25M3 Technical Manual BI619307 - Image 5

Bucyrus 25M3 Technical Manual BI619307

$30.00

  • Type Of Manual: Technical Manual
  • Manual ID: BI619307
  • Number of Pages: 83
  • Size: 3.0MB
  • Format: PDF
Category:

Product details

  • Model List:

    • 25M3
  • 1. M01256.pdf
  • 1.1. Operators Manual Contents
  • 1.2. Section 1 Handbook Objective
  • 1.2.1. Handbook Objectives
  • 1.3. Section 10 Emergency Shutdown
  • 1.3.1. Emergency Shutdown
  • 1.3.1.1. Transmitter Stops
  • 1.3.1.2. Emergency Stop Locations
  • 1.3.2. Emergency Procedures
  • 1.3.2.1. General
  • 1.3.2.1.1. MINIMISE THE USE OF COMMUNICATION SYSTEMS TO LEAVE THE LINES CLEAR FOR EMERGENCY COMMUNICATIONS TRAFFIC.
  • 1.4. Section 11 Troubleshooting
  • 1.4.1. Troubleshooting
  • 1.4.1.1. Traction
  • 1.4.1.2. Cutters
  • 1.4.1.3. Conveyor
  • 1.4.2. Water Troubleshooting Guide
  • 1.5. Section 2 Notes to the Operator
  • 1.5.1. Notes, Cautions and Warnings
  • 1.5.2. Operating Procedures
  • 1.6. Section 3 Defects,Hazards and Safety
  • 1.6.1. General information
  • 1.6.1.1. Introduction
  • 1.6.1.2. Warnings and Symbols
  • 1.6.1.3. Isolation Procedures
  • 1.6.1.4. Main Isolator
  • 1.6.1.5. Safety Instructions and Precautions
  • 1.6.2. Safe and Controlled Zones
  • 1.6.3. Safety Instructions for Operational Phases
  • 1.6.3.1. Normal Operation
  • 1.6.3.2. Flitting Operation
  • 1.6.3.3. Safety Instructions for Maintenance and Repair Procedures
  • 1.6.4. Hazards
  • 1.6.4.1. Electric Energy
  • 1.6.4.2. Hydraulics
  • 1.6.4.3. Oils, Greases and other Chemicals
  • 1.6.5. Safety Equipment
  • 1.6.5.1. Emergency Stop Buttons
  • 1.6.5.2. Emergency Stop Button Locations
  • 1.6.5.3. Transmitter Emergency Stop Switch
  • 1.6.5.4. Audible Warnings
  • 1.6.5.5. Strobe Lights
  • 1.6.5.6. Cutter Head Stops
  • 1.6.5.7. Conveyor Boom Stops
  • 1.6.5.8. Cutter Stops
  • 1.6.5.9. Gathering Head Stops
  • 1.6.5.10. Personal Safety Equipment
  • 1.6.6. Radio Remote Control System
  • 1.6.6.1. General
  • 1.7. Section 4 Machine Description
  • 1.7.1. General Description
  • 1.7.1.1. Machine Layout
  • 1.7.1.2. Specifications
  • 1.7.2. Component Descriptions
  • 1.7.2.1. Main Chassis
  • 1.7.2.2. Cutting Head Assembly
  • 1.7.2.3. Gathering Head Assembly
  • 1.7.2.4. Conveyor Assembly
  • 1.7.2.5. Traction Drive System
  • 1.7.2.6. Hydraulic System
  • 1.7.2.7. Water System
  • 1.8. Section 5 Controls and Their Functions
  • 1.8.1. Circuit Isolators
  • 1.8.1.1. Main Circuit Breaker (Q1)
  • 1.8.1.2. Flit Mode Circuit Breaker (Q2)
  • 1.8.2. Push Buttons Switches
  • 1.8.2.1. Control E/L Test
  • 1.8.2.2. Control and Lights E/L Reset
  • 1.8.2.3. Traction Earth Leakage Test
  • 1.8.2.4. Traction Earth Leakage Reset
  • 1.8.2.5. Pump Start
  • 1.8.2.6. Pump Stop
  • 1.8.2.7. Radio/Manual Selector
  • 1.8.2.8. Holville CH4 Reset Selector
  • 1.8.2.9. Holville CH4 Remote Reset.
  • 1.8.2.10. Left Side Machine Emergency Stop
  • 1.8.2.11. Right Side Machine Emergency Stop
  • 1.8.3. Radio Remote Control System
  • 1.8.3.1. Remote Control Transmitter
  • 1.8.3.1.1. Transmitter Timeout
  • 1.8.3.1.2. Multiple Transmitters
  • 1.8.3.1.3. Radio signal continuity
  • 1.8.3.1.4. Turn the Transmitter on
  • 1.8.3.1.5. Turn the Transmitter off
  • 1.8.3.1.6. Hydraulic Pump Start
  • 1.8.3.1.7. Hydraulic Pump Stop
  • 1.8.3.1.8. Raise Cutter
  • 1.8.3.1.9. Lower Cutter
  • 1.8.3.1.10. Conveyor up
  • 1.8.3.1.11. Conveyor down
  • 1.8.3.1.12. Conveyor left
  • 1.8.3.1.13. Conveyor right
  • 1.8.3.1.14. Apron Down
  • 1.8.3.1.15. Apron up
  • 1.8.3.1.16. Lower stabiliser
  • 1.8.3.1.17. Raise stabiliser
  • 1.8.3.1.18. Cutters
  • 1.8.3.1.19. Start Cutters
  • 1.8.3.1.20. Stop Cutters
  • 1.8.3.1.21. Tramming
  • 1.8.3.1.22. Tramming Speeds
  • 1.8.3.1.23. Conveyor Forward
  • 1.8.3.1.24. Conveyor Reverse
  • 1.8.3.1.25. Conveyor Stop
  • 1.8.3.2. Transmitter Maintenance Battery Charger
  • 1.8.3.3. Display Unit
  • 1.8.3.4. Main Monitor Screen
  • 1.8.3.5. Production Monitor Screen No.1
  • 1.8.3.6. Production Monitor Screen No 2 Boom Monitor
  • 1.8.4. Modes of Control
  • 1.8.4.1. Radio / Manual Mode Switch
  • 1.8.4.2. Radio Mode
  • 1.8.4.3. Manual Mode
  • 1.8.4.3.1. Pendant
  • 1.9. Section 6 Pre Start Checks
  • 1.9.1. Pre-Start Functions
  • 1.9.1.1. Inspections
  • 1.10. Section 7 Start Up Procedure
  • 1.10.1. Start Up Functions
  • 1.11. Section 8 Operating Procedures
  • 1.11.1. Using 25M3 Miner
  • 1.11.1.1. Precautions
  • 1.11.1.2. Transmitter Start Up Time
  • 1.11.2. Mining Mode
  • 1.11.2.1. General
  • 1.11.2.2. Cutting Coal
  • 1.11.2.3. Emergency Tram Mode
  • 1.11.2.4. E/Stop Override Emergency Tram
  • 1.11.3. Flit Mode
  • 1.11.4. Power Fill Mode
  • 1.12. Section 9 Shut Down Procedure
  • 1.12.1. Shutdown Functions
  • 1.12.1.1. Parking
  • 1.12.1.2. Shutdown Checks
Rate this product

Related products