Bucyrus 8200 Dragline Technical Manual BI624080
Bucyrus 8200 Dragline Technical Manual BI624080 - Image 2
Bucyrus 8200 Dragline Technical Manual BI624080 - Image 3
Bucyrus 8200 Dragline Technical Manual BI624080 - Image 4
Bucyrus 8200 Dragline Technical Manual BI624080 - Image 5

Bucyrus 8200 Dragline Technical Manual BI624080

$30.00

  • Type Of Manual: Technical Manual
  • Manual ID: BI624080
  • Number of Pages: 209
  • Size: 8.2MB
  • Format: PDF
Category:

Product details

  • Model List:

    • 8200 Dragline
  • 1. Maint Man.pdf
  • 1.1. SECTION 1
  • 1.1.1. BUSCHINGS
  • 1.1.2. GEAR ALIGNMENT ECCENTRICS (DRAGLINES ONLY)
  • 1.1.3. GEAR BACKLASH
  • 1.1.4. ECCENTRIC CARTRIDGES (DRAGLINES ONLY)
  • 1.1.5. SPLINES
  • 1.1.6. ANTI-FRICTION BEARINGS
  • 1.1.7. SHRINK FIT COMPONENTS
  • 1.1.8. CAP SCREWS
  • 1.1.9. WIRE LOCK CAP SCREWS
  • 1.1.10. WIRE ROPE CARE
  • 1.1.11. BOOM STRAND PENDANTS
  • 1.1.12. REPAIR WELDING PROCEDURES
  • 1.1.13. O-RING GUIDE
  • 1.1.14. GRID COUPLINGS
  • 1.1.15. FALK STEELFLEX COUPLINGS
  • 1.1.16. GEAR COUPLINGS
  • 1.1.17. MOTOR-GENERATOR KEYLESS COUPLINGS (DRAGLINES ONLY)
  • 1.1.18. OIL TIGHT SEALING OF BOLTED JOINTS
  • 1.2. SECTION 2
  • 1.2.1. LUBRICATION FITTINGS
  • 1.2.2. ANTI-FRICTION BEARINGS
  • 1.2.3. OPEN GEARS
  • 1.2.4. EXTREME TEMPERATURE OPERATION
  • 1.2.5. WIRE ROPE PENDANT LUBRICATION
  • 1.2.6. CHECK LIST
  • 1.2.7. LUBRICATION SPECIFICATIONS – GREASES
  • 1.2.8. LUBRICATION SPECIFICATIONS – OILS
  • 1.2.9. GEAR LUBRICANTS (OIL TYPE)
  • 1.2.10. DESCRIPTION OF OIL AND GREASE CLASSIFICATION
  • 1.2.11. SPECIAL PRODUCTS
  • 1.2.12. APPROVED PRODUCTS
  • 1.2.13. LUBRICATION OF PROPEL MACHINERY
  • 1.2.14. LUBRICATION OF CENTER JOURNAL
  • 1.2.15. LUBRICATION OF ROTATING MACHINERY
  • 1.2.16. LUBRICATION OF ROLLER CIRCLE
  • 1.2.17. LUBRICATION OF HOIST MACHINERY
  • 1.2.18. LUBRICATION OF DRAG MACHINERY
  • 1.2.19. LUBRICATION OF HOIST, DRAG, PROPEL BRAKE
  • 1.2.20. LUBRICATION OF FAIRLEAD AND TRI-STRUCTURE
  • 1.2.21. LUBRICATION OF BOOM
  • 1.2.22. LUBRICATION OF DRAGLINE BUCKET
  • 1.2.23. LUBRICATION OF MISCELLANEOUS POINTS
  • 1.2.24. AUTOMATIC LUBRICATION SYSTEM
  • 1.2.25. ALARM RESET
  • 1.2.26. AUTO LUBE FOR WIRE ROPE SPRAY
  • 1.2.27. AUTO LUBE FOR PROPEL MACHINERY
  • 1.2.28. AUTO LUBE FOR ROTATING FRAME
  • 1.2.29. AUTO LUBE FOR OPEN GEARS
  • 1.2.30. AUTO LUBE FOR FRONT END
  • 1.3. SECTION 3
  • 1.3.1. AIR COMPRESSORS
  • 1.3.2. INSPECT (BELT DRIVE)
  • 1.3.3. ANTI-FREEZER
  • 1.3.4. MAGNET VALVES
  • 1.3.5. PRESSURE REGULATORS
  • 1.3.6. ROTO SEAL
  • 1.3.7. AIR CYLINDER VALVES
  • 1.3.8. AIR FILTERS
  • 1.3.9. AIR VALVES
  • 1.3.10. LUBRICATORS
  • 1.3.11. QUICK RELEASE VALVE
  • 1.3.12. AIR FILTER SYSTEM
  • 1.4. SECTION 4
  • 1.4.1. CENTER JOURNAL
  • 1.4.2. ROLLER CIRCLE
  • 1.4.3. ROLLER RAILS
  • 1.4.4. HOOK SHOES
  • 1.4.5. PROPEL MACHINERY
  • 1.4.6. PROPEL GEAR CASE
  • 1.4.7. PROPEL MOTOR EXTENSION SHAFT
  • 1.4.8. FIRST INTERMEDIATE PROPEL SHAFT
  • 1.4.9. SECOND INTERMEDIATE SHAFT
  • 1.4.10. DISASSEMBLING PROPEL GEAR CASE
  • 1.4.11. ASSEMBLE GEAR CASE
  • 1.4.12. MAIN PROPEL DRIVE PINNION SHAFT
  • 1.4.13. MAIN PROPEL SHAFT
  • 1.4.14. WALKING SHOE
  • 1.4.15. WALKING SHOE RETURN MECHANISM
  • 1.4.16. MOTOR EXTENSION SHAFT
  • 1.4.17. LUBRICATION OF GEAR CASE
  • 1.4.18. ROTATING BRAKE
  • 1.4.19. ADJUST ROTATING BRAKE
  • 1.4.20. HOIST AND DRAG MACHINERY
  • 1.4.21. HOIST AND/OR DRAG DRUM
  • 1.4.22. HOIST OR DRAG MACHINERY GEAR CASE
  • 1.4.23. DISASSEMBLE GEAR CASE
  • 1.4.24. HOIST/DRAG LIMIT SWITCH
  • 1.4.25. HOIST, DRAG AND PROPEL BRAKES
  • 1.4.26. ADJUST BRAKE
  • 1.4.27. HOIST AND DRAG ROPES
  • 1.4.28. ROPE WINCH
  • 1.4.29. CHANGE HOIST ROPE(S)
  • 1.4.30. CHANGE DRAG ROPE(S)
  • 1.4.31. METHOD OF LOWERING BOOM
  • 1.4.32. RAISE BOOM
  • 1.4.33. BOOM POINT SHEAVE
  • 1.4.34. DISASSEMBLE BOOM POINT SHEAVES
  • 1.4.35. INSTALL ANTI-FRICTION BEARINGS
  • 1.4.36. REASSEMBLE BOOM POINT SHEAVE
  • 1.4.37. INSTALLATION OF CLASS C BOLTS
  • 1.4.38. ANTI-TIGHT LINE LIMIT SWITCH
  • 1.4.39. INTERMEDIATE BOOM SUPPORT
  • 1.4.40. BOOM SUPPORT
  • 1.4.41. SAFETY ROPES
  • 1.4.42. HOIST DEFLECTOR SHEAVES
  • 1.4.43. PROCEDURE FOR ASSEMBLING FAIRLEAD SWIVEL PINS INTO MOUNTING BRACKET
  • 1.4.44. FAIRLEAD SNUBBERS
  • 1.4.45. LOWER FAIRLEAD SHEAVES
  • 1.4.46. MARION DRAGLINE BUCKET
  • 1.5. SECTION 5
  • 1.5.1. CARE OF D.C. MOTORS AND GENERATORS
  • 1.5.2. BRUSHES
  • 1.5.3. INSTALLATION OF BRUSHES
  • 1.5.4. COMMUTATORS
  • 1.5.5. LUBRICANT OF BEARINGS
  • 1.5.6. ELECTRICAL TROUBLE SHOOTING
  • 1.5.7. INVESTIGATION
  • 1.5.8. PERFORMANCE
  • 1.5.9. TYPES OF FAILURES
  • 1.5.10. SHORT CIRCUITS
  • 1.5.11. SWING CONTROL PEDALS
  • 1.5.12. COLLECTOR RINGS
  • 1.5.13. POWER CONTROL ROOM (PCR)
  • 1.6. SECTION 6
  • 1.6.1. OPERATION
  • 1.6.2. WARNING PANEL
  • 1.6.3. CHECK LIST
  • 1.6.4. MACHINE OPERATION
  • 1.6.5. PLUGGING THE CONTROLS
  • 1.6.6. HOIST OPERATION
  • 1.6.7. DRAG OPERATION
  • 1.6.8. SWING OPERATION
  • 1.6.9. GROUND PREPARATION
  • 1.6.10. RAMPING
  • 1.6.11. OPERATING THE WALKING MECHANISM
  • 1.6.12. WALKING MACHINERY
  • 1.6.13. PROPEL CONTROL
  • 1.6.14. WALKING THE MACHINE
  • 1.6.15. TYPICAL DIGGING CYCLE
Rate this product

Related products