Bucyrus Bucyrus CAT Mounted Bootend Technical Manual BI620109
Bucyrus Bucyrus CAT Mounted Bootend Technical Manual BI620109 - Image 2
Bucyrus Bucyrus CAT Mounted Bootend Technical Manual BI620109 - Image 3
Bucyrus Bucyrus CAT Mounted Bootend Technical Manual BI620109 - Image 4
Bucyrus Bucyrus CAT Mounted Bootend Technical Manual BI620109 - Image 5

Bucyrus Bucyrus CAT Mounted Bootend Technical Manual BI620109

$30.00

  • Type Of Manual: Technical Manual
  • Manual ID: BI620109
  • Number of Pages: 61
  • Size: 3.3MB
  • Format: PDF
Category:

Product details

  • Model List:

    • Bucyrus CAT Mounted Bootend
  • 1. M01363.pdf
  • 1.1. General Safety
  • 1.2. About this manual
  • 1.2.1. BEFORE STARTING WORK
  • 1.2.2. PURPOSE OF THIS OPERATING MANUAL
  • 1.2.2.1. Characters and symbols used
  • 1.2.3. PERSONNEL
  • 1.2.3.1. Erection and repair
  • 1.2.4. OPERATING CONDITIONS
  • 1.2.4.1. Intended use
  • 1.2.5. SAFETY INSTRUCTIONS
  • 1.2.5.1. General rules
  • 1.2.5.2. Protective equipment
  • 1.2.5.3. Condition
  • 1.2.5.4. Safety equipment
  • 1.2.5.5. Information signs
  • 1.2.5.6. Emergency-stop
  • 1.2.5.7. Block working area
  • 1.2.5.8. Moving parts
  • 1.2.5.9. Handling of Hydraulic Fluids
  • 1.2.5.10. Maintenance and Repair
  • 1.2.5.11. Permissible Hoses
  • 1.2.5.12. Installation of Hydraulic Hoses
  • 1.3. Storage and Transport
  • 1.3.1. Transport safety device
  • 1.3.2. Lifting device
  • 1.3.3. Floor conveying device
  • 1.3.4. ERECTION AND COMMISSIONING
  • 1.3.4.1. Inclined storage
  • 1.3.4.2. Environmental acceptability
  • 1.3.5. OPERATION
  • 1.3.6. MAINTENANCE AND REPAIR
  • 1.3.6.1. Replacing parts
  • 1.3.6.2. Original parts
  • 1.3.6.3. Working in Mining Area
  • 1.3.6.4. Lifting points
  • 1.3.6.5. Safety equipment
  • 1.3.7. TRANSPORT/TOWING PROCEDURE
  • 1.3.7.1. Load Units Dimensions and Weights
  • 1.4. Introduction
  • 1.4.1. COMPONENTS
  • 1.4.1.1. Crawler Lift Cylinders
  • 1.4.1.2. Slew Cylinders
  • 1.4.1.3. Slew Lift Cylinders
  • 1.4.1.4. Travelling Carriage
  • 1.4.1.5. Impact Trough
  • 1.4.1.6. Conveyor Tail Pulley and Return Idler
  • 1.4.1.7. Belt Lifting Device
  • 1.4.1.8. Control Station
  • 1.5. Installation
  • 1.5.1. INSTALLING THE CAT MOUNTED BOOTEND
  • 1.5.2. START UP THE BOOTEND INSTALLATION
  • 1.5.3. HYDRAULIC SYSTEM
  • 1.5.4. SHUTDOWN PROCEDURE-INSTALLATION
  • 1.5.5. EMERGENCY SHUTDOWN-INSTALLATION
  • 1.5.6. DISMANTLING AND REMOVING THE EQUIPMENT
  • 1.6. Operation
  • 1.6.1. Sequence of Operation
  • 1.6.2. Start Up Procedure-Operation
  • 1.6.3. Shutdown Procedure-Operation
  • 1.6.4. MOVING THE BOOTEND
  • 1.6.5. SIDE SLEWING THE BOOTEND
  • 1.6.5.1. Purpose
  • 1.6.5.2. Construction
  • 1.6.5.3. Maintenance
  • 1.6.6. ANGLED TYPE BELT WIPER (SELF-ADJUSTING)
  • 1.6.6.1. Purpose
  • 1.6.6.2. Construction
  • 1.6.6.3. Maintenance
  • 1.6.7. SNUB PULLEY (CUSTOMER SUPPLIED)
  • 1.6.8. TAIL PULLEY (CUSTOMER SUPPLIED)
  • 1.6.9. PINNED ON HINGED SKIRTS (SOLID STEEL)
  • 1.6.9.1. Purpose
  • 1.6.9.2. Construction
  • 1.6.9.3. Maintenance
  • 1.6.10. UNDERSIDE SLIDING DOLLY WITH TRAPPING SHOE
  • 1.6.10.1. Purpose
  • 1.6.10.2. Construction
  • 1.6.10.3. Maintenance
  • 1.6.11. LUBRICATION SYSTEM (CUSTOMER SUPPLIED)
  • 1.6.12. LUBRICATION SCHEDULE (CAT MOUNTED BOOTEND)
  • 1.6.13. CONTROL STATION
  • 1.6.13.1. Purpose
  • 1.6.13.2. Construction
  • 1.6.13.3. Maintenance
  • 1.6.14. STANDARD MULTI-FUNCTION CYLINDER CONTROL VALVE BANK
  • 1.6.14.1. Purpose
  • 1.6.14.2. Construction
  • 1.6.14.3. Maintenance
  • 1.6.14.4. Operation
  • 1.6.15. STANDARD MULTI-SECTION CYLINDER CONTROL VALVE BANK
  • 1.6.15.1. Purpose
  • 1.6.15.2. Construction
  • 1.6.15.3. Maintenance
  • 1.6.15.4. Operation
  • 1.6.16. FIXED PRESSURE REDUCER
  • 1.6.16.1. Purpose
  • 1.6.16.2. Construction
  • 1.6.16.3. Maintenance
  • 1.6.16.4. Operation
  • 1.6.17. FIXED OVER PRESSURE RELIEF
  • 1.6.17.1. Purpose
  • 1.6.17.2. Construction
  • 1.6.17.3. Maintenance
  • 1.6.18. PILOT OPERATED EMERGENCY SHUT OFF VALVE
  • 1.6.18.1. Purpose
  • 1.6.18.2. Construction
  • 1.6.18.3. Maintenance
  • 1.6.18.4. Operation
  • 1.6.19. FIXED FLOW CONTROL VALVE
  • 1.6.19.1. Purpose
  • 1.6.19.2. Construction
  • 1.6.19.3. Maintenance
  • 1.6.20. PRESSURE AND RETURN CONNECTION STATION
  • 1.6.20.1. Purpose
  • 1.6.20.2. Construction
  • 1.6.20.3. Maintenance
  • 1.6.20.4. Operation
  • 1.6.21. CRAWLER LIFT JACKS
  • 1.6.21.1. Purpose
  • 1.6.21.2. Construction
  • 1.6.21.3. Maintenance
  • 1.6.21.4. Operation
  • 1.6.22. SIDE SLEW (LIFT AND SLEW)
  • 1.6.22.1. Purpose
  • 1.6.22.2. Construction
  • 1.6.22.3. Maintenance
  • 1.6.22.4. Operation
  • 1.6.23. IDLER ROLLERS (CUSTOMER SUPPLIED)
  • 1.6.23.1. Purpose
  • 1.6.23.2. Construction
  • 1.6.23.3. Maintenance
  • 1.6.24. TRAMMING THE CRAWLER-SINGLE TORQUE HUB (4WD) TYPE WITH BRAKE
  • 1.6.25. TOWING AND FREE WHEELING-SINGLE TORQUE HUB (4 WD)
  • 1.6.26. TENSIONING OF THE CRAWLER PAD CHAINS-TORQUE HUB TYPE
  • 1.6.27. ADDING, REMOVING OR REPLACING CAT PADS-TORQUE HUB TYPE
  • 1.6.27.1. Replacing a Broken Pad
  • 1.6.27.2. Adding a Crawler Pad
  • 1.6.27.3. Removing a Crawler Pad
  • 1.6.28. TRAM MOTOR-2000 SERIES 11.9 CU.IN
  • 1.6.29. TORQUE HUB-CT45 SERIES 1110.07
  • 1.6.29.1. Purpose
  • 1.6.29.2. Construction
  • 1.6.29.3. Maintenance
  • 1.6.29.4. Operation
  • 1.6.30. CRAWLERS-SINGLE TORQUE HUB (4WD) TYPE
  • 1.7. Technical data
  • 1.7.1. TECHNICAL DATA SHEET
  • 1.7.1.1. Dimensional Stats
  • 1.7.1.2. Roller and Bearing Stats
  • 1.7.1.3. Belt and Trough Stats
  • 1.7.1.4. Drive Stats
  • 1.7.1.5. Crawler Stats
  • 1.7.1.6. Cylinder Stats
  • 1.7.1.7. Dolly Stats
  • 1.7.1.8. Restraining Device
Rate this product

Related products