Bucyrus DBT Ashton BSL And Bootend Technical Manual BI618960
Bucyrus DBT Ashton BSL And Bootend Technical Manual BI618960 - Image 2
Bucyrus DBT Ashton BSL And Bootend Technical Manual BI618960 - Image 3
Bucyrus DBT Ashton BSL And Bootend Technical Manual BI618960 - Image 4
Bucyrus DBT Ashton BSL And Bootend Technical Manual BI618960 - Image 5

Bucyrus DBT Ashton BSL And Bootend Technical Manual BI618960

$30.00

  • Type Of Manual: Technical Manual
  • Manual ID: BI618960
  • Number of Pages: 92
  • Size: 2.5MB
  • Format: PDF
Category:

Product details

  • Model List:

    • DBT Ashton BSL And Bootend
  • 1. M00704.pdf
  • 1.1. General Safety
  • 1.2. Isolation Procedures
  • 1.2.1. Outbye and Monorail
  • 1.2.2. Shields
  • 1.2.2.1. Hydraulic Bleed Points
  • 1.2.2.2. Operation Screw Type
  • 1.2.2.3. Operation Manometer Gauge Port Type
  • 1.2.3. AFC and BSL
  • 1.2.4. Bootend
  • 1.2.5. Residual Risk
  • 1.2.5.1. Supplementary Regulations
  • 1.2.6. Personnel
  • 1.2.6.1. Operation and maintenance
  • 1.2.6.2. Qualification
  • 1.2.7. Use in conformance with specifications
  • 1.2.8. Use contrary to specifications
  • 1.2.9. Safety instructions
  • 1.2.9.1. Basic principles
  • 1.2.9.2. Lighting
  • 1.2.9.3. Signalling Systems and Protective Devices
  • 1.2.9.4. Emergency Stop
  • 1.2.9.5. Support Lock-out Switch
  • 1.2.9.6. Moving Parts
  • 1.2.10. Storage and transport
  • 1.2.11. Hydraulics
  • 1.2.11.1. Handling of Hydraulic Fluids
  • 1.2.11.2. Maintenance and Repair
  • 1.2.11.3. Permissible Hoses
  • 1.2.11.4. Installation of Hydraulic Hoses
  • 1.2.12. Hosing colours
  • 1.3. Storage and transport
  • 1.3.1. Storage
  • 1.3.1.1. Storing the equipment
  • 1.3.2. Transport
  • 1.3.2.1. Before transport
  • 1.3.2.2. Transport of the components
  • 1.4. Assembly
  • 1.4.1. Prior to Assembly
  • 1.4.1.1. Who is allowed to carry out assembly work
  • 1.4.1.2. Assembly notes
  • 1.4.1.3. Clamping bolt connection in the overlapping area
  • 1.4.2. Functions and Purpose of BSL
  • 1.4.3. Major components of BSL
  • 1.4.3.1. BSL Return Head (Gradient Pan)
  • 1.4.3.2. Minipans
  • 1.4.3.3. BSL Gooseneck
  • 1.4.3.4. Monorail Removal Platform
  • 1.4.4. Water Circuit
  • 1.4.5. Crusher
  • 1.4.6. Greasing
  • 1.4.7. Dust extraction (Customer Supplied)
  • 1.5. BSL – Carry Out Start, Stop and Shut-down Procedures
  • 1.5.1. Normal Start
  • 1.5.2. Temporary Stop Procedure
  • 1.5.3. Normal Shutdown Procedure
  • 1.5.4. BSL Start-up Sequence
  • 1.5.5. Running BSL with Slowrunners
  • 1.6. BSL Maintenance
  • 1.6.1. BSL Chain Tensioning
  • 1.6.2. Breaking and Removing Chain Procedure
  • 1.6.3. Changing BSL Flights
  • 1.6.4. Adjusting Crusher Passage Height
  • 1.6.5. Fluid Coupling Gearbox Maintenance Checking and Filling BS
  • 1.6.6. Running BSL with Slowrunners
  • 1.6.7. Checking and Changing BSL Gearbox Oil
  • 1.6.7.1. To check the BSL drive oil level
  • 1.6.7.2. To top up oil
  • 1.6.8. Permissible media
  • 1.6.8.1. Hydraulic fluids
  • 1.7. Boot End
  • 1.7.1. Functions and Purpose of Boot End
  • 1.7.2. Major Components of the Bootend
  • 1.7.3. Roller Snubber Roller
  • 1.7.4. Control Bank
  • 1.7.4.1. Purpose
  • 1.7.4.2. Construction
  • 1.7.4.3. Maintenance
  • 1.7.4.4. Operation
  • 1.7.5. Multi-Section Cylinder Control Valve Bank
  • 1.7.5.1. Purpose
  • 1.7.5.2. Construction
  • 1.7.5.3. Maintenance
  • 1.7.5.4. Operation
  • 1.7.6. Fixed Pressure Reducer
  • 1.7.6.1. Purpose
  • 1.7.6.2. Construction
  • 1.7.6.3. Maintenance
  • 1.7.6.4. Operation
  • 1.7.7. Fixed Over Pressure Relief
  • 1.7.7.1. Purpose
  • 1.7.7.2. Construction
  • 1.7.7.3. Maintenance
  • 1.7.7.4. Operation
  • 1.7.8. Pilot Operated Emergency Shut-Off Valve
  • 1.7.8.1. Purpose
  • 1.7.8.2. Construction
  • 1.7.8.3. Maintenance
  • 1.7.8.4. Operation
  • 1.7.9. Fixed Flow Control Valve
  • 1.7.9.1. Purpose
  • 1.7.9.2. Construction
  • 1.7.9.3. Maintenance
  • 1.7.9.4. Operation
  • 1.7.10. Pressure and Return Connection Station
  • 1.7.10.1. Purpose
  • 1.7.10.2. Construction
  • 1.7.10.3. Maintenance
  • 1.7.10.4. Operation
  • 1.7.11. Crawler Lift Cylinders
  • 1.7.11.1. Purpose
  • 1.7.11.2. Construction
  • 1.7.11.3. Maintenance
  • 1.7.11.4. Operation
  • 1.7.12. Side Slew (Lift and Slew)
  • 1.7.12.1. Purpose
  • 1.7.12.2. Construction
  • 1.7.12.3. Maintenance
  • 1.7.12.4. Operation
  • 1.7.13. Idler Rollers
  • 1.7.13.1. Purpose
  • 1.7.13.2. Construction
  • 1.7.13.3. Maintenance
  • 1.7.13.4. Operation
  • 1.8. Bootend Operation
  • 1.8.1. Isolating Boot End
  • 1.8.2. Boot End Sequence of Operation
  • 1.8.3. Start-up procedure
  • 1.8.4. Shutdown procedure
  • 1.8.5. Moving the Bootend
  • 1.8.6. Side Slewing the Bootend
  • 1.8.7. Tramming the Crawler
  • 1.8.8. Towing and Free Wheeling
  • 1.8.9. Crawler unit maintenance
  • 1.8.10. Bootend Line and Level
  • 1.9. Bootend Maintenance
  • 1.9.1. Isolation and Depressurisation Procedure
  • 1.9.2. Inspections
  • 1.9.2.1. Shift Inspections
  • 1.9.2.2. Daily Inspections
  • 1.9.2.3. Monthly Inspections
  • 1.9.2.4. monthly Inspections
  • 1.9.3. Hose Replacement – General
  • 1.9.4. Cylinder Replacement – General
  • 1.9.5. Changing Control Cartridge
  • 1.9.6. Changing Pilot Valve Units
  • 1.9.7. Changing Filter
  • 1.9.8. Side Shift Cylinder Replacement Procedure
  • 1.9.9. Lift Cylinder Replacement
  • 1.10. Lubrication Inspections
  • 1.10.1. Greasing
  • 1.10.1.1. Water Circuit
  • 1.10.1.2. Inspection (Shift)
  • 1.10.1.3. Inspection (Daily)
  • 1.10.1.4. K8 Gearbox output shaft grease point
Rate this product

Related products