Caterpillar Impact Roll Crusher SB 0815 Operation And Maintenance Manual BI636393
Caterpillar Impact Roll Crusher SB 0815 Operation And Maintenance Manual BI636393 - Image 2
Caterpillar Impact Roll Crusher SB 0815 Operation And Maintenance Manual BI636393 - Image 3
Caterpillar Impact Roll Crusher SB 0815 Operation And Maintenance Manual BI636393 - Image 4
Caterpillar Impact Roll Crusher SB 0815 Operation And Maintenance Manual BI636393 - Image 5

Caterpillar Impact Roll Crusher SB 0815 Operation And Maintenance Manual BI636393

$30.00

  • Type Of Manual: Operation And Maintenance Manual
  • Manual ID: BI636393
  • Number of Pages: 56
  • Size: 0.8MB
  • Format: PDF
Category:

Product details

  • Model List:

    • Impact Roll Crusher SB 0815
  • 1. Documentation Impact roll crusher SB 0818 Consol BMX 2 938000003
  • 1.1. Crusher plant SB 0815 Operating manual
  • 1.1.1. Content
  • 1.1.2. About this manual
  • 1.1.2.1. Before starting work
  • 1.1.2.1.1. Who is this operating manual intended for
  • 1.1.2.1.2. What is the purpose of this operating manual
  • 1.1.2.1.3. Characters and symbols used
  • 1.1.3. For your safety
  • 1.1.3.1. Personnel
  • 1.1.3.2. General Safety instructions
  • 1.1.3.3. Operating conditions
  • 1.1.3.3.1. Intended use
  • 1.1.3.3.2. Unauthorized use
  • 1.1.4. Storage and transport
  • 1.1.4.1. Storage
  • 1.1.4.1.1. Storing the equipment
  • 1.1.4.2. Transport
  • 1.1.4.2.1. Before transport
  • 1.1.4.2.2. Transport of the components
  • 1.1.5. Assembly
  • 1.1.5.1. What to observe prior to assembly
  • 1.1.5.1.1. Who is allowed to carry out assembly work
  • 1.1.5.1.2. Assembly notes
  • 1.1.5.2. Dismantling
  • 1.1.6. Technical data
  • 1.1.6.1. Technical data sheet
  • 1.1.6.2. Main components
  • 1.1.6.3. Components
  • 1.1.6.4. Technical description
  • 1.1.6.4.1. Crusher housing and substructure
  • 1.1.6.4.2. Impact roll
  • 1.1.6.4.3. Impact heads
  • 1.1.6.4.4. Roll height adjustment
  • 1.1.6.4.5. Central lubrication
  • 1.1.6.5. Tightening torques
  • 1.1.6.5.1. Screws resp. nuts with metric coarse thread DIN 13
  • 1.1.6.6. Permissible media
  • 1.1.6.6.1. Lubricating greases
  • 1.1.6.6.2. Hydraulic fluids
  • 1.1.7. Operation
  • 1.1.7.1. Commissioning of the crusher plant
  • 1.1.7.1.1. Before commissioning
  • 1.1.7.1.2. Notes for electrics
  • 1.1.7.1.3. Test run and start up
  • 1.1.7.2. Operation of the crusher plant
  • 1.1.7.2.1. General
  • 1.1.7.2.2. Roll height adjustment
  • 1.1.7.2.3. Changing the drive end
  • 1.1.7.3. Maintenance
  • 1.1.7.3.1. Maintenance acc. to schedule
  • 1.1.7.3.2. Lubrication
  • 1.1.7.3.3. Changing the impact heads
  • 1.1.7.4. Spare parts and special tools
  • 1.1.8. Decommissioning and wastemanagement
  • 1.1.8.1. Notes for dismantling
  • 1.1.8.2. Procedure
  • 1.1.8.3. Waste management
  • 1.2. Spare parts
  • 1.2.1. Impact roll crusher SB 0815 938000003
  • 1.2.1.1. Substructure
  • 1.2.1.2. Impact roll
  • 1.2.1.3. Crusher housing
  • 1.2.1.4. Hydraulic height adjustment
  • 1.2.1.5. Central lubricatiuon
  • 1.3. Supplier documentations
  • 1.3.1. Tensioning nut CY M42x3/W (Nord-Lock)
  • 1.3.1.1. General
  • 1.3.1.2. Content
  • 1.3.1.3. Tightening procedure
  • 1.3.1.3.1. Check
  • 1.3.1.3.2. Which tools
  • 1.3.1.3.3. Preparation
  • 1.3.1.3.4. Tightening
  • 1.3.1.4. Loosening procedure
  • 1.3.1.4.1. Usage at normal temperatures (< 100 C)
  • 1.3.1.4.2. Usage at high temperatures (> 100 C)
  • 1.3.1.5. Lubrication and tools
  • 1.3.1.5.1. Lubricant
  • 1.3.1.5.2. Sockets
  • 1.3.1.5.3. Power tools
  • 1.3.1.5.4. Power tools (continuation)
  • 1.3.1.6. Maintenance
  • 1.3.1.6.1. Regular checks
  • 1.3.1.6.2. Preventive maintenance
  • 1.3.1.6.3. If you encounter problems
  • 1.3.1.7. General notes
  • 1.3.1.7.1. Tightening of tensioners with only 4 or 6 jackbolts
  • 1.3.1.7.2. Tightening of long tie rods
  • 1.3.1.7.3. Gaskets with large elastic displacements
  • 1.3.1.7.4. Tensioning large flanges or joints
  • 1.3.1.7.5. Usage of spacers
  • 1.3.1.7.6. Retensioning for high temperature applications
  • 1.3.1.7.7. Recutting of the bolt threads
  • 1.3.1.7.8. Installation tools
  • 1.3.1.7.9. Protective caps
  • 1.3.1.8. Consultance
  • 1.3.2. Clamping element TLK 400, 240×305 (Tollok)
  • 1.3.2.1. Assembly instructions
  • 1.3.2.2. Dismounting instructions
  • 1.3.2.3. Reusing the clamping set
  • 2. CAT SB09 cover.pdf
Rate this product

Related products