Caterpillar TH514D Operation And Maintenance Manual 31211176
Caterpillar TH514D Operation And Maintenance Manual 31211176 - Image 2
Caterpillar TH514D Operation And Maintenance Manual 31211176 - Image 3
Caterpillar TH514D Operation And Maintenance Manual 31211176 - Image 4
Caterpillar TH514D Operation And Maintenance Manual 31211176 - Image 5

Caterpillar TH514D Operation And Maintenance Manual 31211176

$30.00

  • Type Of Manual: Operation And Maintenance Manual
  • Manual ID: 31211176
  • Number of Pages: 224
  • Size: 20.3MB
  • Format: PDF
Category:

Product details

  • Model List:

    • TH514D
  • 1. _D_TH514D (ANSI)_CAT_Operation_English
  • 1.1. Revision Log
  • 1.2. Read This First
  • 1.3. Table of Contents
  • 1.3.1. Section 1 – General Safety Practices
  • 1.3.2. Section 2 – Pre-Operation and Inspection
  • 1.3.3. Section 3 – Controls and Indicators
  • 1.3.4. Section 4 – Operation
  • 1.3.5. Section 5 – Attachments
  • 1.3.6. Section 6 – Emergency Procedures
  • 1.3.7. Section 7 – Lubrication and Maintenance
  • 1.3.8. Section 8 – Additional Checks
  • 1.3.9. Section 9 – Specifications
  • 1.4. Section 1 – General Safety Practices
  • 1.4.1. Hazard Classification System
  • 1.4.1.1. Safety Alert System and Safety Signal Words
  • 1.4.2. General Precautions
  • 1.4.3. Operation Safety
  • 1.4.3.1. Electrical Hazards
  • 1.4.3.2. Tip Over Hazard
  • 1.4.3.3. Travel Hazard
  • 1.4.3.4. Load Falling Hazard
  • 1.4.3.5. Lifting Personnel
  • 1.4.3.6. Driving Hazards on Slopes
  • 1.4.3.7. Pinch Points and Crush Hazards
  • 1.4.3.8. Fall Hazard
  • 1.4.3.9. Chemical Hazards
  • 1.4.4. Product Link (if equipped)
  • 1.4.4.1. Federal Communications Commission (FCC) Information for Users
  • 1.5. Section 2 – Pre-Operation and Inspection
  • 1.5.1. Preparation, Inspection and Maintenance
  • 1.5.2. Pre-Operation Check and Inspection
  • 1.5.3. Safety Decals
  • 1.5.4. Walk-Around Inspection
  • 1.5.5. Warm-Up and Operational Checks
  • 1.5.5.1. Warm-Up Check
  • 1.5.5.2. Operational Check
  • 1.5.6. Cab
  • 1.5.7. Enclosed Cab Windows (if equipped)
  • 1.5.7.1. Cab Door Window
  • 1.5.7.2. Rear Window
  • 1.6. Section 3 – Controls and Indicators
  • 1.6.1. General
  • 1.6.2. Controls
  • 1.6.2.1. Instrument Panel
  • 1.6.2.2. LCD Display
  • 1.6.2.3. Left Dash Control Panel
  • 1.6.2.4. Right Dash Control Panel
  • 1.6.2.5. Ignition
  • 1.6.2.6. Park Brake
  • 1.6.2.7. Parking Procedure
  • 1.6.2.8. Transmission Control Lever (if equipped)
  • 1.6.2.9. Accessory Control Lever (if equipped)
  • 1.6.2.10. Steering Column Adjuster
  • 1.6.2.11. Joystick
  • 1.6.3. Anti-Theft Functionality (if enabled)
  • 1.6.3.1. Instrument Panel Input
  • 1.6.3.2. Multifunction Display Input
  • 1.6.4. Steer Modes
  • 1.6.4.1. Manual Steering Alignment Mode Change
  • 1.6.4.2. All Wheel Assisted Steering Alignment Mode Change
  • 1.6.5. Operator Seat
  • 1.6.5.1. Adjustments
  • 1.6.5.2. Seat Belt
  • 1.6.6. Boom Extension Indicators
  • 1.6.7. Reverse Systems (if equipped)
  • 1.6.7.1. Reverse Sensing System
  • 1.6.7.2. Reversing Camera (if equipped)
  • 1.6.8. Multifunction Display (if equipped)
  • 1.6.8.1. General Information
  • 1.6.8.2. Multifunction Display and Buttons
  • 1.6.8.3. Home Screen
  • 1.6.8.4. Main Menu
  • 1.6.8.5. Operation and Maintenance
  • 1.6.8.6. Troubleshooting
  • 1.7. Section 4 – Operation
  • 1.7.1. Engine
  • 1.7.1.1. Starting the Engine
  • 1.7.1.2. Extreme Cold Weather Starting (if equipped)
  • 1.7.1.3. Battery Boosted Starting
  • 1.7.1.4. Normal Engine Operation
  • 1.7.1.5. Shut-Down Procedure
  • 1.7.2. Operating with a Non-Suspended Load
  • 1.7.2.1. Lift Load Safely
  • 1.7.2.2. Picking Up a Load
  • 1.7.2.3. Transporting a Load
  • 1.7.2.4. Leveling Procedure
  • 1.7.2.5. Placing a Load
  • 1.7.2.6. Disengaging a Load
  • 1.7.3. Operating with a Suspended Load
  • 1.7.3.1. Lift Load Safely
  • 1.7.3.2. Picking Up a Suspended Load
  • 1.7.3.3. Transporting a Suspended Load
  • 1.7.3.4. Leveling Procedure
  • 1.7.3.5. Placing a Suspended Load
  • 1.7.3.6. Disengaging a Suspended Load
  • 1.7.4. Loading and Securing for Transport
  • 1.7.4.1. Tie Down
  • 1.7.4.2. Lifting
  • 1.8. Section 5 – Attachments
  • 1.8.1. Approved Attachments
  • 1.8.2. Unapproved Attachments
  • 1.8.3. JLG Supplied Attachments
  • 1.8.4. Telehandler/Attachment/Fork Capacity
  • 1.8.5. Use of the Capacity Chart
  • 1.8.5.1. Capacity Indicator Locations
  • 1.8.5.2. Sample Capacity Chart
  • 1.8.5.3. Example
  • 1.8.6. Attachment Installation
  • 1.8.6.1. Coupler
  • 1.8.6.2. Hydraulic Operated Attachment
  • 1.8.7. Adjusting/Moving Forks
  • 1.8.8. Attachment Operation
  • 1.8.8.1. Carriage with Forks
  • 1.8.8.2. Fork Positioning Carriage
  • 1.8.8.3. Side Tilt Carriage
  • 1.8.8.4. Swing Carriage
  • 1.8.8.5. Side Shift Carriage
  • 1.8.8.6. Fork Extension
  • 1.8.8.7. Pipe Grapple
  • 1.8.8.8. Multi-Purpose Bucket
  • 1.8.8.9. Grapple Bucket
  • 1.8.8.10. Concrete Bucket Mixer
  • 1.8.8.11. Sweeper
  • 1.8.8.12. Truss Boom
  • 1.8.8.13. Material Handling Arm
  • 1.8.8.14. Coupler Mounted Hook
  • 1.8.8.15. Fork Mounted Hook
  • 1.8.8.16. Trash Hopper – Fork Mounted
  • 1.8.8.17. Boom Mounted Lifting Lug
  • 1.8.8.18. Personnel Work Platform – Fork Mounted
  • 1.9. Section 6 – Emergency Procedures
  • 1.9.1. Towing a Disabled Product
  • 1.9.1.1. Moving Short Distances
  • 1.9.1.2. Moving Longer Distance
  • 1.9.2. Emergency Lowering of Boom
  • 1.9.3. Emergency Exit from Enclosed Cab
  • 1.9.3.1. Inside Cab
  • 1.9.3.2. Outside Cab (if equipped)
  • 1.10. Section 7 – Lubrication and Maintenance
  • 1.10.1. Introduction
  • 1.10.1.1. Clothing and Safety Gear
  • 1.10.2. General Maintenance Instructions
  • 1.10.3. Service and Maintenance Schedules
  • 1.10.3.1. , 1st 50 Hour Maintenance Schedule
  • 1.10.3.2. , 1st 250 250 Hour Maintenance Schedule
  • 1.10.3.3. , 750 1000 Hour Maintenance Schedule
  • 1.10.3.4. , 2000 3000 Hour Maintenance Schedule
  • 1.10.3.5. 12000 Hour Maintenance Schedule
  • 1.10.4. Lubrication Schedules
  • 1.10.4.1. Hour Lubrication Schedule
  • 1.10.4.2. Hour Lubrication Schedule
  • 1.10.5. Operator Maintenance Instructions
  • 1.10.5.1. Engine Maintenance Components
  • 1.10.5.2. Fuel System
  • 1.10.5.3. Emission System
  • 1.10.5.4. Engine Oil
  • 1.10.5.5. Air Intake System
  • 1.10.5.6. Hydraulic Oil
  • 1.10.5.7. Transmission Oil
  • 1.10.5.8. Brake Fluid
  • 1.10.5.9. Engine Cooling System
  • 1.10.5.10. Windshield Washer System (if equipped)
  • 1.10.5.11. Cab Air Filters (if equipped)
  • 1.11. Section 8 – Additional Checks
  • 1.11.1. General
  • 1.11.2. Reverse Sensing System (if equipped)
  • 1.11.3. Boom Interlock
  • 1.12. Section 9 – Specifications
  • 1.12.1. Product Specifications
  • 1.12.1.1. Capacities
  • 1.12.1.2. Performance
  • 1.12.1.3. Dimensions
Rate this product

Related products